Kundencenter vServer Start Stop/en
Aus EUserv Wiki
Root (Diskussion | Beiträge) (→Executing Start/Stop) |
Root (Diskussion | Beiträge) (→Startup Enable/Disable) |
||
| Zeile 43: | Zeile 43: | ||
<br> | <br> | ||
| - | === Startup | + | === Startup enable/disable === |
To allow to start automatically vServer after a pure stable, startup must be enabled. "Startup" is activated after the first initialization. If you liked to change this status, then click on "Disable Startup". | To allow to start automatically vServer after a pure stable, startup must be enabled. "Startup" is activated after the first initialization. If you liked to change this status, then click on "Disable Startup". | ||
Version vom 07:53, 1. Okt. 2012
| Languages: |
Deutsch |
Start/Stop a vServer
Inhaltsverzeichnis |
Start/Stop a vServer
General
If you have an EUserv vServer tariff, so there is the possibility to the EUserv Customer comprehensively establish.
You will also need to operate corresponding parameters that you read in the Customer and/or to adjust.
The function start/stop, you have the ability to stop your vServer temporarily and/or restart. So you can take your vServer 'net ", without data loss or reinstalling is needed. A stop is outside the Customer also not possible (after stop via Login restarts vServer to be on the safe side)
Preparing Start/Stop
In EUserv customer center, you have the ability to start or stop your vServer. Select first from your vServer contract for which you want to start or stop.
Once you have selected your vServer contract, now click on the menu item "Start/Stop" under vServer.
Executing start/stop
Do you want to stop your vServer, or "off", so click on "stop vServer". If you start again your vServer, "enable" are trying, just click on "Start vServer".
Startup enable/disable
To allow to start automatically vServer after a pure stable, startup must be enabled. "Startup" is activated after the first initialization. If you liked to change this status, then click on "Disable Startup".
